GRAS 67SB Blast Probe Microphone according to ANSI S12.42

Freq range: 10 Hz to 20 kHz
Dyn range: 52 dB(A) to 174 dB

The GRAS 67SB Blast Probe is designed as a reference microphone for impulse measurements according to the ANSI/ASA S12.42 standard.

Technology

The 67SB Blast Probe is designed as a reference microphone for impulse measurements according to the ANSI S12.42 standard. The 67SB can measure impulse signals with an A-duration of 0.5 ms ≤ impulse ≤ 2.0 ms, and it has a working range of 10 Hz – 20 kHz. The 1/8” reference microphone inside the 67SB is ideally suited for capturing impulsive signals with a very fine time resolution. This microphone has an upper limit of 174 dB in the dynamic range.

The 67SB is equipped with a 1/8" reference microphone which is designed to capture impulsive noise with a very short duration. The 67SB is provided with a 1/4" threaded hole for monting the 67SB directly on a tripod e.g. AL0006.

The design and concept of the 67SB, and the microphone and preamplifier, comply with the following standards:
• ANSI S12.42 – “Methods for the Measurement of Insertion Loss of Hearing Protection Devices in Continuous or Impulsive Noise Using Microphone-in-Real Ear or Acoustic Test Fixture Procedures”
• IEC Standard 61094-1 – “Specifications for Laboratory Standard Microphones”

The 67SB has a length of 410 mm.

Specifications

Polarization/Connection
200 V / Traditional
Frequency range (±2 dB)
Hz
10 to 20 k
Dynamic range lower limit with GRAS preamplifier
dB(A)
52
Dynamic range upper limit
dB
174
Microphone venting
Rear
Output impedance
Ω
75
Temperature range, operation
°C / °F
-30 to 70 / -22 to 158
Temperature range, storage
°C / °F
-40 to 85 / -40 to 185
Static pressure coefficient @250 Hz
dB/kPa
-0.01 at 25 °C
Humidity range non condensing
% RH
0 to 95
Humidity coefficient @250 Hz
dB/% RH
<0.1/0-100
Influence of axial vibration @1 m/s²
dB re 20 µPa
59
Connector type
7-pin LEMO (FGG.1B.307)
CE/RoHS compliant/WEEE registered
Yes/Yes/Yes
Weight
g / oz
650 /22.9

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Ordering info

Included

GRAS RA0246 Calibration clip for use with Pistonphone
GRAS GR1243 Pistonphone adapter
GRAS YY0012 1.5 mm Hex key
GRAS LI0056 Manual

Optional

GRAS 12AK 1-ch LEMO Power Module with gain, filters and SysCheck generator
GRAS AA0008 3 m LEMO extension cable
GRAS AA0009 10 m LEMO extension cable
GRAS 42AP Intelligent Pistonphone
GRAS AL0006 Tripod

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.